Product Details:

Used for Determination of flakiness index of coarse aggregates.
It consists of a steel frame with a sliding panel having slots of different dimensions, Used for determination of elongation index of aggregates. It consists of a steel frame
 having slots of different dimensions. The frame is fixed on a hard wooden base.

  Product Details:

Determines bulk density or unit weight of aggregates

  Product Details:

For the determination of the unit weight of aggregate

  Product Details:

For Density Tests on Aggregates as per Procedure Laid Down

  Product Details:

for the rapid
collection of true representative samples from aggregates, sand and
fillers

  Product Details:

to attain the desired quality

  Product Details:

for determining the aggregate impact value.

  Product Details:

used to the density of hardened concrete specimens such as
cubes and cylinders can be quickly and accurately

  Product Details:

used for determining the resistance to wear of small size coarse aggregates
and crushed rock

  Product Details:

For The Determination of Resistance of Aggregates to Wear by
Abrasion.

  Product Details:

For Testing Aggregates for Resistance to Abrasion.

  Product Details:

used for determination of resistance to wear for Cement &
Concrete flooring tiles.

  Product Details:

for fast crushing of Aggregates, Ores, Minerals, Coal, Coke, Chemicals and other similar
materials.

  Product Details:

"to grind virtually any material to produce a fine

  Product Details:

used to determine Softening point of Bitumen

  Product Details:

for operation on 230 V, 50Hz, Single Phase, A.C. s

  Product Details:

Used to determine the water in petroleum products or bituminous
materials by distilling them with volatile solvent

  Product Details:

Used to determine grade of bitumen. The penetration tests
determine consistency of bitumen for the purpose of grading

  Product Details:

provided with lead screw gear
arrangement, Leveling screws, Spirit level.

  Product Details:

For determining the hardness number of Mastic Asphalt for flooring.

  Product Details:

For determining stripping value of bituminous mixes having
aggregate size: 1.0mm to 75 micron.

  Product Details:

used for determining the Saybolt Furol Viscosity
of bituminous materials at temperatures of 250, 275, 300, 350, 400
and 450 F.

  Product Details:

for determining the viscosity of cutback bitumen and road oil

  Product Details:

 provides higher accuracy for acceptance testing procedures

  Product Details:

used for determination and checking of Bitumen
percentage in Bituminous mix, the mix is added with a solvent and
dissolved bitumen is removed by centrifugal action.

  Product Details:

Used for the determination of bitumen percentage in bituminous
mixtures.

  Product Details:

used to measure the rebound deflection of a flexible pavement.

  Product Details:

used to determine lateral surface regularity of a road surface.

  Product Details:

used to determine the ductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min

  Product Details:

measure and compact soil samples for testing

  Product Details:

used with the Stability Compaction Mold during the compaction process of the specimen

  Product Details:

used with the Stability Compaction Mold during the compaction process of the specimen

  Product Details:

 to determine the laboratory maximum dry density of soils, and for preparation of CBR specimens.

  Product Details:

used by jewelers to flatten articles and stampings in the manufacture of parts and design work, metalworking and crafts

  Product Details:

to hot mix designs using bitumen and
aggregates upto a maximum size of 25mm

  Product Details:

Used in conjunction with an Iso Mantle, is suitable for
mixing samples of asphal

  Product Details:

for compacting soil accurately and quickly

  Product Details:

Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materials

  Product Details:

Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materialsCompact size with light weight as well as safety in
operation,

  Product Details:

MASONARY TABLE SAW
For people who work with stone, brick, large tiles or blocks,

  Product Details:

to cut through tiles, bricks, concrete, blocks of stone, and other hard materials

  Product Details:

for high Temperature & to avoid heat loss Silent Hot Air Blower,

  Product Details:

used to obtain homogeneously aged material by the application of heat and air in order to simulate
these affects in conventional mixing

  Product Details:

for cutting and grinding cylindrical rock specimens upto NX size. The outfit includes 200mm

  Product Details:

use for testing cement, concrete and mortar cubes.

  Product Details:

For concrete compressive strength testing we offer highly
sophisticated testing machines

  Product Details:

measured on Bourdon tube type load
gauges which are calibrated against certified proving ringsOne Year30-45 days

  Product Details:

to meet the need for a simple, economic and reliable
means to test concrete for its compressive strength

  Product Details:

to meet the need for a simple, economic and reliable means to test
concrete for its compressive strength.

  Product Details:

to meet the need for a simple, economic and reliable means to
test concrete for its compressive strength.

  Product Details:

to provide maximum rigidity throughout their working range.

  Product Details:

for casting concrete specimens for flexural strength testing.

  Product Details:

for testing concrete cylinders for Compressive Strength
Testing are offered in two different sizes.

  Product Details:

provide high and stable accuracy, dependability and
repeatability.

  Product Details:

Used to sample cement in bulk storage or bulk shipments 

  Product Details:

 determines the fineness of Portland Cement

  Product Details:

used for determining the normal consistency and
setting times of cement and 'A' class limes

  Product Details:

used the normal consistency of hydraulic cement in include of water required to prepare hydraulic cement pastes for testing

  Product Details:

used for determining the time setting of hydraulic
cement

  Product Details:

used to determine the work ability of Portland
cement & concrete

  Product Details:

Provides convenience for the operator and protection to Kelly ball
when transporting to and from the job site.

  Product Details:

used for determining the work ability of building limes.

  Product Details:

used for determining the flow of cement concrete

  Product Details:

used for determining the flow of cement concrete

  Product Details:

used for measuring the consistency of pozzolana and also
cement mortar and hydrated lime.

  Product Details:

used for measuring the consistency of pozzolana and also
cement mortar and hydrated lime, but electrically operated.

  Product Details:

used for work ability as well as consistency of fresh
concrete.

  Product Details:

 used to measure the consistency and workability of fresh concrete, and indirectly, the water/cement ratio of the concrete mix.

  Product Details:

used for determining the work ability of fresh
concrete, provided the maximum size of the aggregate does not
exceed 38mm

  Product Details:

used in construction of buildings, houses, road and other
construction purposes

  Product Details:

used for preparing
Mix Design of Concrete

  Product Details:

used for mixing cement pastes, mortars and pozzolanas

  Product Details:

For determining the consistency of masonry mortar Consists of a
movable bearing rod to which a cone 145mm.

  Product Details:

Used For Casting Concrete Specimens For Compression Strength Testing

  Product Details:

used for the determination of soundness by expansion method
of ordinary and rapid hardening Portland cement, low heat Portland
cement and class 'A' Lime

  Product Details:

Used for finding specific gravity of hydraulic cement. Made from
Borosilicate glass

  Product Details:

used for casting specimens of cement & aggregate
combinations for measuring the potential expansive alkali reactivity.

  Product Details:

used for casting specimens of cement & aggregate
combinations for measuring the potential expansive alkali reactivity.

  Product Details:

used for casting specimens of cement & aggregate
combinations for measuring the potential expansive alkali reactivity.

  Product Details:

used for casting specimens of cement & aggregate
combinations for measuring the potential expansive alkali reactivity.

  Product Details:

used for determining the volume change of
cement concrete

  Product Details:

used to measure the dying shrinkage of concrete autoclave
expansion of Portland cement and potential expansive reactivity of
cement aggregate combinations in mortar bars during storage, on
self drying

  Product Details:

for conducting accelerated soundness tests
on cements or the autoclave expansion test requiring constant
steam pressure with the correspondent constant pressure

  Product Details:

to determine the heat of hydration of
cement as expressed in calories per gram.

  Product Details:

used to aid the compaction of materials in containers, boxes, and bulk bags

  Product Details:

used for vibrating the mix in moulds at a
frequency of 12,000 ± 400 cycles per minute

  Product Details:

Used to compact cement mortar prisms 40x40x160 mm in the three gang mould

  Product Details:

Using for making tensile strength test on cement briquettes

  Product Details:

 to perform quality tests on lightweight and high-strength materials

  Product Details:

For casting of cement briquettes for tensile strength tests.

  Product Details:

used for Cement Sample preparation

  Product Details:

used for finding out the rate of hardening of mortar sieved from
concrete spring and a stem graduated from 0-70 kg x 1 kg.

  Product Details:

used on  light weight concrete, special roof deck mixes and concrete
additives.

  Product Details:

use, for quick and approximate measurement of the resistance to pressure of
manufactured concrete products.

  Product Details:

used for testing concrete with over size aggregates (for which test, cubes promise no reliable results) and for
testing concrete roads

  Product Details:

useful for medical and laboratory use

  Product Details:

Used to melt Capping compound this pot comprises a metal
container in a well lagged steel jacket.

  Product Details:

For capping 300 mm dia x 600 mm high cylindrical specimens in the field or in the laboratory

  Product Details:

used both in the laboratory and in the field

  Product Details:

 used for determining strain and deformation characteristics of standard concrete cylinders of 150mm diameter x 300mm length

  Product Details:

 determining strain and deformation characteristics of standard concrete cylinders of 150mm diameter x 300mm length

  Product Details:

used for finding out the linear deformation caused on two
reference points fixed on a loading member

  Product Details:

used to measure the air content of cement, fresh mortar, and concrete by the air pressure compensation principle.

  Product Details:

Used for determining the slump of fine aggregate in the
determination of bulk and apparent specific gravity and absorption
of fine aggregate.

  Product Details:

for curing concrete cubes, beams and cylinders.

  Product Details:

used in case of congested reinforcement places the needle may not go in concrete surface

  Product Details:

used to determine the flexural
strength of clay roofing tiles and cement concrete flooring tiles

  Product Details:

used for determination of resistance to wear for cement
concrete flooring tiles

  Product Details:

used to drive sheet piles, pipes or other elements into the soil by vertical vibrations

  Product Details:

used in a number of agricultural machines, such as tractors, to raise and lower tools and equipment to the proper working height

  Product Details:

For water proofing of concrete admixture and special water proof
cements are used

  Product Details:

Besides functional considerations, permeability is also intimately related to the durability of concrete, specially its resistance, against progressive deterioration under exposure to severe climate, and leaching due to prolonged seepage of water, particularly when it contains aggressive gases or minerals in solution.

  Product Details:

used to determine the depth of penetration of water under pressure in the concrete specimens

  Product Details:

use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products

  Product Details:

 to provide an instrument designed for applications requiring numerous measurements

  Product Details:

used to record the absolute location of the tunnel walls, ceilings (backs), and floors

  Product Details:

precisely measure walls, corners, manholes on the road surface, even chain-link fences and tree branches

  Product Details:

handle your most demanding survey layout or as-built project needs

  Product Details:

Combining the efficiency of a single-operator robotic system, the power of long range reflectorless measurements, and performance as a hybrid positioning solution

  Product Details:

to drag and drop plots, gates, or data within the Layout Navigator or directly onto the layout.