Product ID: TS-MECH-101
"MODEL OF HYDRAULIC BRAKING SYSTEM WITH
VACUM BOOSTER (TATA INDICA)"
"The model will be made out of Used TATA Indica brake aggregates
which will be suitably sectioned, Left Front disc and Left rear drum
will be made working, using necessary hydraulic connection from
the Master cylinder, By operating the brake pedal connected to
the Master cylinder through booster, the functioning of disc and
drum brake can be demonstrated. The aggregates on the other
side will be suitably sectioned to show the internal details and will
be kept dummy. All the aggregates wil
Product Specifications:
Product Details:
allows the driver to create more braking force at the wheels with less pressure on the pedal.
|
Product ID: TS-MECH-102
"CUT SECTION MODEL OF DISC BRAKE SYSTEM TWO WHEELER"
"This model is made out of original used parts, will be suitably
sectioned And Arranged to demonstrate the internal
construction details showing the minute information such as the
disc brake assembly, master cylinder on the handle, its piping,
front wheel assembly with disc , handle bar with cylinder and
brake lever etc., and working of the same can be show by
operating the brake lever, the model will be suitably painted and
The entire model is mounted on a sturdy iron frame."
Product Specifications:
Product Details:
better stopping performance than drum brakes because the disc is more readily cooled
|
Product ID: TS-MECH-103
"CUT SECTIONAL MODEL OF FOUR STROKE SINGLE
CYLINDER ENGINE ASSEMBLY (HERO HONDA)"
"The engine and gearbox assembly, sectioning of maximum parts
an accessories like Cylinder, Cylinder Head, Valve ports, Gear box,
housing, Oil sump, etc will be carried out to show the internal
constructional details such as Piston, Piston rings, Valves, cam,
connecting rod ,etc. the model will be mounted on stand. The
above model will be painted with Spl Duco painting,
Electroplating of hardware will be carried out"
Product Specifications:
Product Details:
used for motorcycles, motor scooters, motorized bicycles, go-karts, all-terrain vehicles, radio-controlled vehicles, power tools and garden machinery
|
Product ID: TS-MECH-104
"CUT SECTION MODEL OF TWO STROKE SINGLE
CYLINDER ENGINE (WORKING)"
"This model is made out of used BAJAJ engine, suitably sectioned to
show the internal construction of the engine, gear box, clutch and
rear wheel mechanism and the model is fitted on a sturdy iron
frame."
Product Specifications:
Product Details:
use in handheld tools such as chainsaws
|
Product ID: TS-MECH-105
Rack and Pinion Type
a type of linear actuator that comprises a circular gear (the pinion) engaging a linear gear (the rack). Together, they convert between rotational motion and linear motion. Rotating the pinion causes the rack to be driven in a line.
Product Specifications:
Product Details:
used for lifting mechanisms (vertical movement), horizontal movement, positioning mechanisms, stoppers and to permit the synchronous rotation of several shafts in general industrial machinery
|
Product ID: TS-MECH-106
Worm and Roller Type
The worm and roller steering gear combines a space saving set-up with relatively smooth running, due to the low friction coefficient, and keeps the effort low, in comparison with the recirculating ball steering
Product Specifications:
Product Details:
used to reduce the rotational speed and to increase the torque
|
Product ID: TS-MECH-107
Recirculating Ball Type
The recirculating ball steering mechanism contains a worm gear inside a block with a threaded hole in it
Product Specifications:
Product Details:
reduce friction and wear in the gear, and reduce slop.
|
Product ID: TS-MECH-108
Power Steering
Power steering is a mechanical device installed on a vehicle that reduces the effort needed to turn the steering wheel, making it easier for the vehicle to turn or maneuver at low speeds.
Product Specifications:
Product Details:
reduces the effort needed to turn the steering wheel
|
Product ID: TS-MECH-109
Rack and Pinion Type
A rack and pinion is a type of linear actuator that comprises a circular gear (the pinion) engaging a linear gear (the rack)
Product Specifications:
Product Details:
used for lifting mechanisms (vertical movement), horizontal movement, positioning mechanisms, stoppers and to permit the synchronous rotation of several shafts in general industrial machinery
|
Product ID: TS-MECH-110
Worm and Roller Type
The rollers between the worm and sector gears reduce friction, resulting in less effort from the driver to turn the steering wheel
Product Specifications:
Product Details:
used to reduce the rotational speed and to increase the torque.
|
Product ID: TS-MECH-111
Recirculating Ball Type
this block has gear teeth cut into the outside to engage the sector shaft (also called a sector gear) which moves the Pitman arm.
Product Specifications:
Product Details:
reduce friction and wear in the gearOne Year30-45 days
|
Product ID: TS-MECH-112
Model of Steering of Jeep with Stub Axle
"This model is made out of original used parts, will be suitably
sectioned And Arranged to demonstrate the internal construction
details showing the minute information such as steering gear box,
bell assembly, tyre rod , linkages, stub axle etc., and working of
the same can be show by steering the steering wheel provided, the
model will be suitably painted and The entire model is mounted on
a sturdy iron frame."
Product Specifications:
Product Details:
it is able to traverse rough roads without disturbing its load
|
Product ID: TS-MECH-113
Fully Floating Differential and Rear Wheel
"This model is made out of original used heavy vehicle parts,
suitably sectioned to show clearly the action of Differential gear
box, such as pinion crown wheel in Differential and Brake drums in
Rear axle, A Crank handle is provided to demonstrate the model.
The model is mounted on a sturdy iron frame."
Product Specifications:
Product Details:
designed to bear the weight of the vehicle as well as any additional cargo or towing load
|
Product ID: TS-MECH-114
Semi Floating Deferential and Wheel
"This model is made out of original used light vehicle, suitably
sectioned to show the action of Differential gear box and Brake
drums in Rear axle. A Crank handle is provided to demonstrate the
model. The whole model is mounted on a sturdy iron frame"
Product Specifications:
Product Details:
a semi-floating axle bears both the rotational force from the wheels and a portion of the vehicle's weight
|
Product ID: TS-MECH-115
Model of Mechanical Brake System
"This model is made out of original used parts such as Brake drum,
Brake Shoes, Brake peddle, etc., suitably sectioned and mounted
on a wooden base. By operating the Brake drum and applying the
Brake pedal this model can be demonstrated"
Product Specifications:
Product Details:
used to stop the vehicle
|
Product ID: TS-MECH-116
Model of Air brake System
"The model is made out of Original parts such as Air compressor,
Unloader valve, foot valve, Booster, Wheel assembly, air tank,
control valve etc Suitably sectioned and mounted on a sturdy iron
frame."
Product Specifications:
Product Details:
used to make the brakes work
|
Product ID: TS-MECH-117
Model of Air Brake System (Working
"The model is made out of Original parts such as Air compressor,
Unloader valve, foot valve, Booster, Wheel assembly, air tank,
control valve etc The Brake system will be fitted with two front
wheel assembly complete ( with out axle) and the drum will be
suitably sectioned to show the working of the brake shoe. Other
system will be mounted as it is and will be made to function ( foot
brake, hand brake etc will be functional.)the entire system will be
mounted on a sturdy iron frame. A F.H.
Product Specifications:
Product Details:
The driver pushes down the foot valve treadle and air pressure flows to the front and rear brake chambers
|
Product ID: TS-MECH-118
Model of Hydraulic Brake Unit
"This model contain two disc brakes in the front and two drum
brakes at the rear and it is made out of original parts such as two
master cylinder Assembly (one sectioned and one working), wheel
cylinder, Brake drum, Brake Shoes, calipers etc., suitably sectioned
and mounted on a sturdy iron frame. By operating the lever
provided, the working procedure of the model can be
demonstrated."
Product Specifications:
Product Details:
cranes, lifts, elevators, aeroplanes, and mining vehicles
|
Product ID: TS-MECH-119
Model of Drum Brake Unit
"This model is made out of original parts such as Two Brake drum
assembly, two master cylinder (one sectioned), wheel cylinders
(one sectioned), Brake Shoes, etc., the model can be
demonstrated by operating the lever provided"
Product Specifications:
Product Details:
used for parking brakes on passenger cars, the center brakes on trucks, and brakes on forklifts.
|
Product ID: TS-MECH-120
Model of Disc Brake System
"The Model is made out of Orginal parts such as Two Brake disc,
two Caliper assembly (one sectioned), two master cylinder (one
sectioned) etc, the model is mounted on a sturdy iron frame and
can be demonstrated by operating the lever provided"
Product Specifications:
Product Details:
to stop or decelerate the wheels
|
Product ID: TS-MECH-121
Hydraulic Braking System with vacum Booster
"The model will be made out of Used TATA Indica brake aggregates
which will be suitably sectioned, Left Front disc and Left rear drum
will be made working, using necessary hydraulic connection from
the Master cylinder, By operating the brake pedal connected to
the Master cylinder through booster, the functioning of disc and
drum brake can be demonstrated. The aggregates on the other
side will be suitably sectioned to show the internal details and will
be kept dummy. All the aggregates wil
Product Specifications:
Product Details:
allows the driver to create more braking force at the wheels with less pressure on the pedal.
|
Product ID: TS-MECH-122
Model of Disc Brake System Two Wheeler
"This model is made out of original used parts, will be suitably
sectioned And Arranged to demonstrate the internal
construction details showing the minute information such as the
disc brake assembly, master cylinder on the handle, its piping,
front wheel assembly with disc , handle bar with cylinder and
brake lever etc., and working of the same can be show by
operating the brake lever, the model will be suitably painted and
The entire model is mounted on a sturdy iron frame."
Product Specifications:
Product Details:
to stop or decelerate the wheels
|
Product ID: TS-MECH-123
Valve Timing Diagram
Valve Timing Diagram is a graphical representation of the opening and closing times of intake and exhaust valves in an internal combustion engine. It illustrates the relationship between the piston's position and the valve events, crucial for engine performance
Product Specifications:
Product Details:
It illustrates the relationship between the piston's position and the valve events, crucial for engine performance
|
Product ID: TS-MECH-124
Port Timing Diagram
It is a graphic representation of the moments when the valves or ports of an internal-combustion engine open and close relative to the position of the piston, that is, to the angle of rotation of the engine's crankshaft.
Product Specifications:
Product Details:
The port timing diagram shows when each port opens and closes relative to the piston's top dead center and bottom dead center positions. The procedure involves observing the piston uncover and cover each port as the flywheel is rotated and marking the positions on the flywheel to create the diagram.
|
Product ID: TS-MECH-125
CNC Production Lathe
rotates the material it cuts while operating on two axes. Because the rotation of the material is usually referred to as 'turning,' CNC lathes are sometimes referred to as CNC turning machines. The inside and outside of the component may be machined using CNC turning machines
Product Specifications:
Product Details:
used to create shapes such as screw heads, or to drill holes in components such as gears and axels
|
Product ID: TS-MECH-126
CNC Production Mill
"CNC PRODUCTION MILL with inbuilt CNC system consist of 3
axis stepper motors, ball screws, variable speed spindle motor,
limit/home switch provided with inverter"
Product Specifications:
Product Details:
to mass-produce many components from various materials and plastics
|
Product ID: TS-MECH-127
Whirling of Shaft Apparatus
"This compact and simple apparatus incorporated two features.
Firstly, kinematics coupling at the driven end of the shaft to slide
freely in longitudinal direction while revolving readily. The
directional clamping of this end of the shaft is achieved by and
interchangeable chuck without self aligning radial ball bearing.
The shaft is driven through a dynamically balanced flexible coupling
by a universal motor, the speed of which can be controlled by a
control unit. The speed of rotation o
Product Specifications:
Product Details:
to investigate shaft criticality for 2, 3, or 4 bearing systems
|
Product ID: TS-MECH-128
Vibration Lab Apparatus
"Vibration lab machine for performing experiments on longitudinal
and torsional vibrations with control panels and speed indicators"
Product Specifications:
Product Details:
Exp.1-Simple pendulum
Exp. 2- Compound Pendulum
Exp. 3- Bifiler suspension
Exp. 4- Spring mass system
Exp. 5- Equivalent spring mass system to study the undamped free
vibration
Exp. 6- Equivalent spring mass system to study forced calibration.
Exp. 7- Verification of Dukerley's rule
Exp. 8- To study of force vibration for various amount of damping.
Exp. 9- Torisional vibration for the single rotor system
Exp. 10- Torisional vibration for the two rotor system
Exp. 11- Single rotor with viscous damping
|
Product ID: TS-MECH-129
Motorized Gyroscope
"This is to demonstrate the relationship between applied torque
and the rate and direction of rotation. This is motorized and
mounted on a frame such that free to rotate about three
perpendicular axis. This facilitates to observe the laws of stability
and justification of equation."
Product Specifications:
Product Details:
used for measuring or maintaining orientation and angular velocity.
|
Product ID: TS-MECH-130
Universal Governor Apparatus
"The set up consists of a small electric motor connected bevel
reduction gear box or belt and pulley system through a flexible
coupling. The Governor spindle is driven by a solid coupling
connected to the gear box output shaft and is supported on ball
bearing. The optional governor mechanism can be mounted on
spindle. Speed control unit is provided to regulate speed and
extension to the spindle shaft can be sued to use hand
tachometer. The center sleeve to the porter and proell governors
Product Specifications:
Product Details:
a) The effect of varying mass of the center sleeve.
b) The effect of varying the rotating mass.
c) Determination of characteristic curves of sleeve position against
speed of rotation.
The effect of varying the initial spring compression
|
Product ID: TS-MECH-131
Static and Dynamic Apparatus
"This is suitable for conducting experiments on static balancing
and dynamic balancing with different weights. This consists of
rectangular frame of steel perfectly balance with four different
blocks. A protractor scale of the disc is provided to reach exact angular position of each weight to be measured. A linear scale provided below the frame provides the measurement of each weight along the shaft."
Product Specifications:
Product Details:
conducting experiments on static balancing and dynamic balancing with different weights
|
Product ID: TS-MECH-132
CAM ANALYSIS APPARATUS
"The machine facilitates the study of dynamic behavior of cam
follower. It consists of a DC Motor coupled to an extension shaft
whose and carries a cam. A cam follower, mounted on the end of
a vertical bar, is loaded on the cam face by compression spring is
retained by a cross bar mounted on two vertical pillars attached to
the base plate. Facility is provided to vary the pre compression of
spring"
Product Specifications:
Product Details:
testing the cam performance for jump phenomenon during operation
|
Product ID: TS-MECH-133
Journal Bearing Apparatus
"Simple Demonstrations Observation of the pressure profile
at the various conditions of load and speed
2) Experimental Investigation After noting the pressure profile for any chosen conditions the following analysis may be conducted"
Product Specifications:
Product Details:
helps to demonstrate and study the effect of important variables such as speed, viscosity and load, on the pressure distribution in a Journal Bearing
|
Product ID: TS-MECH-134
Epicylic Gear Apparatus
Epicyclic gearing or planetary gearing is a gear system consisting of one or more outer, or planet, gears or pinions, revolving about a central sun gear or sun wheel.
Product Specifications:
Product Details:
various mechanical devices
|
Product ID: TS-MECH-135
Corollis Component of Acceleration
"Coriolli's components of Acceleration can be determined at
various speeds of rotation at water flow rates."
Product Specifications:
Product Details:
various speeds of rotation at water flow rates
|
Product ID: TS-MECH-136
Three Stage Spur Gear
Model of Three Stage Spur Gear
Product Specifications:
Product Details:
Model of Three Stage Spur Gear
|
Product ID: TS-MECH-137
Spur, Helical, Bevel Gear
Model of Spur, Helical, Bevel Gear
Product Specifications:
Product Details:
Model of Spur, Helical, Bevel Gear
|
Product ID: TS-MECH-138
Rack & Pinon
Model of Rack & Pinon
Product Specifications:
Product Details:
Model of Rack & Pinon
|
Product ID: TS-MECH-139
Whit Worth Quick Return Mechanism
Model of Whit Worth Quick Return Mechanism
Product Specifications:
Product Details:
Model of Whit Worth Quick Return Mechanism
|
Product ID: TS-MECH-140
Scotch Yoke Mechanism
Model of Scotch Yoke Mechanism
Product Specifications:
Product Details:
Model of Scotch Yoke Mechanism
|
Product ID: TS-MECH-141
Cam & Follower with Rciprocating
Model of Cam & Follower with Rciprocating
Product Specifications:
Product Details:
Model of Cam & Follower with Rciprocating
|
Product ID: TS-MECH-142
Reversing Gear
Model of Reversing Gear
Product Specifications:
Product Details:
Model of Reversing Gear
|
Product ID: TS-MECH-143
Cam & Follower with Translating
Model of Cam & Follower with Translating
Product Specifications:
Product Details:
Model of Cam & Follower with Translating
|
Product ID: TS-MECH-144
Pawl & Ratchet Motion
Model of Pawl & Ratchet Motion
Product Specifications:
Product Details:
Model of Pawl & Ratchet Motion
|
Product ID: TS-MECH-145
Herring Bone Gear
Model of Herring Bone Gear
Product Specifications:
Product Details:
Model of Herring Bone Gear
|
Product ID: TS-MECH-146
Internal Gear Pinion Drive
Model of Internal Gear Pinion Drive
Product Specifications:
Product Details:
Model of Internal Gear Pinion Drive
|
Product ID: TS-MECH-147
Oldham Coupling
Model of Oldham Coupling
Product Specifications:
Product Details:
Model of Oldham Coupling
|
Product ID: TS-MECH-148
Pelton Wheel Turbine Test Rig
The “ SUNLABTECH” designed and developed experimental unit consists of the Pelton wheel, a needle nozzle used as distributor, a band brake for loading the turbine and a housing with a transparent front panel.
Product Specifications:
Product Details:
used where water at high head is available
|
Product ID: TS-MECH-149
Francis Turbine Test Rig
Francis Turbine is a reaction Turbine, which was developed by English born American Engineer Sir J.B. Francis. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine.
Product Specifications:
Product Details:
used for electrical power production
|
Product ID: TS-MECH-150
Closed Circuit Kaplan Turbine Test Rig
The trainer is provided with a closed water circuit with tank, submersible pump and throttle valve for adjusting the flow rate.
Product Specifications:
Product Details:
used for adjusting the flow rate
|
Product ID: TS-MECH-151
Centrifugal Pump Test Rig
The pump is provided with a vacuum gauge on suction pipe and a pressure gauge on discharge pipe.
Product Specifications:
Product Details:
allows students to find the characteristics of a centrifugal pump. It also allows them to see (and hear) cavitation and understand the use of a Venturi meter and differential pressure measurement to find flow rate
|
Product ID: TS-MECH-152
Closed Circuit Hydraulic Ram Test Rig
designed to simulate real-world conditions, allowing engineers to validate the performance and durability of hydraulic systems under controlled environments.
Product Specifications:
Product Details:
or raising water where the only power available is from a waterfall of 2 metres (6 feet) or more
|
Product ID: TS-MECH-153
Closed Circuit Gear Oil Pump Test Rig
Gear Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed gears, coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor.
Product Specifications:
Product Details:
use the actions of rotating cogs or gears to transfer fluids.
|
Product ID: TS-MECH-154
Reciprocating Pump Test Rig
Reciprocating pump operates on the principle of pushing of liquid by a piston that executes a reciprocating motion in a closed fitting cylinder.
Product Specifications:
Product Details:
The rig can be used to evaluate the pump's capacity, efficiency, and reliability under various operating conditions
|
Product ID: TS-MECH-155
Axial Flow Pump Test Rig
The pump unit absorbs mechanical energy from a drive motor through a shaft. The blades of the impeller which is permanently fixed on the shaft exert a force on the fluid and increase its angular moment. Pressure and absolute speed increase as a result
Product Specifications:
Product Details:
Axial flow pumps are common machines, used to pump water and other liquids
|
Product ID: TS-MECH-156
CC, CD, CV Apparatus
"CLOSED CIRCUIT APPARATUS FOR DETERMINATION
OF CO-EFFICIENT DISCHARGE (CD) CO-EFFICIENT OF
CONTRACTION (CC) CO-EFFICIENT OF VELOCITY (CV)
OF ORIFICES AND MOUTHPIECE"
Product Specifications:
Product Details:
used to determine the coefficient of discharge (Cd), Coefficient of velocity (Cv) and Coefficient of contraction (Cc) of different types of orifice.
|
Product ID: TS-MECH-157
Notch Tank Apparatus
CLOSED CIRCUIT NOTCH TANK APPARATUS
Product Specifications:
Product Details:
used for measuring the rate of flow of a liquid through a small channel or a tank
|
Product ID: TS-MECH-158
Closed Circuit jet on Vane Apparatus
CLOSED CIRCUIT JET ON VANE APPARATUS
Product Specifications:
Product Details:
generates a torque on the wheel, causing it to rotate and to generate electricity.
|
Product ID: TS-MECH-159
Venturi Meter & Orifice Meter
"CLOSED CIRCUIT APPARATUS FOR DETERMINATION
OF FLOW THROUGH VENTURI METER & ORIFICE"
Product Specifications:
Product Details:
used for measuring the rates of flow in incompressible fluid only. Venturimeter is used for measuring rates of flow in both incompressible and compressible fluids.
|
Product ID: TS-MECH-160
Closed Circuit Bernoulli's Theorem
Closed Circuit Bernoulli's Theorem
Product Specifications:
Product Details:
to calculate the change in flow rate, pressure, or elevation at different points along the loop. It is often used to analyze and design fluid flow systems, as well as to troubleshoot any issues that may arise.
|
Product ID: TS-MECH-161
Closed Circuit Reynold's Apparatus
Closed Circuit Reynold's Apparatus
Product Specifications:
Product Details:
To visualize different flow conditions i.e.- Laminar flow,- Transition flow,- Turbulent flow
|
Product ID: TS-MECH-162
Rota Meter Test Rig
"CLOSED CIRCUIT CALIBRATION TEST RIG FOR
MEASURING DISCHARGE OF ROTA METER TEST RIG"
Product Specifications:
Product Details:
measures the volumetric flow rate of fluid in a closed tube
|
Product ID: TS-MECH-163
Pipe Friction Apparatus
"CLOSED CIRCUIT PIPE FRICTION APPARATUS
(MAJOR LOSSES)"
Product Specifications:
Product Details:
to enable students to determine the friction factor in the pipe flow and to study the effect of change in flow velocity on pipe friction.
|
Product ID: TS-MECH-164
Closed Circuit Bernoulli's Theorem
WATER METER TEST RIG
Product Specifications:
Product Details:
Helps to perform fast and easy field meter testing, assuring quick answer to end customers doubts and complaints
|
Product ID: TS-MECH-165
Minor Losses Apparatus
Minor Losses Apparatus
Product Specifications:
Product Details:
to find pressure loss (head loss) for several pipe components over a range of flow rates and compare the experimental findings to theoretical calculations.
|
Product ID: TS-MECH-166
Pitot Tube Apparatus
Pitot Tube Apparatus
Product Specifications:
Product Details:
for measuring a flowing fluid's velocity (speed)
|
Product ID: TS-MECH-167
Metacentric Height Apparatus
Metacentric Height Apparatus
Product Specifications:
Product Details:
used to determine he metacentric height of a ship model under load and unload condition, (flat bottomed vessel)
|
Product ID: TS-MECH-168
Heat Transfer Through Lagged Pipe
Heat Transfer Through Lagged Pipe
Product Specifications:
Product Details:
transports heat from the higher energy level, i.e. higher absolute temperature, to the lower level with lower temperature.
|
Product ID: TS-MECH-169
Emmissivity Measurement Apparatus
Emmissivity Measurement Apparatus
Product Specifications:
Product Details:
accurate non-contact temperature measurement and for heat transfer calculations.
|
Product ID: TS-MECH-170
Thermal Connductivity Insulating Powder
Thermal Connductivity Insulating Powder
Product Specifications:
Product Details:
used in structural and cryogenic systems such as transportation and storage tanks of cryogenic fluids
|
Product ID: TS-MECH-171
Heat Transfer in Natural Convection
Heat Transfer in Natural Convection
Product Specifications:
Product Details:
heat, transferred to a fluid, raises its temperature and reduces its density, giving rise to buoyant forces that lift the fluid (due to density difference) and transport the absorbed heat to some other location where it can be removed.
|
Product ID: TS-MECH-172
Heat Transfer in Forced Convection
Heat Transfer in Forced Convection
Product Specifications:
Product Details:
a ceiling fan, a pump, suction device
|
Product ID: TS-MECH-173
Heat Transfer from Pin-Fin
Heat Transfer from Pin-Fin
Product Specifications:
Product Details:
sed to increase heat transfer from heated surfaces to air
|
Product ID: TS-MECH-174
Stefan Boltzman Apparatus
Stefan Boltzman Apparatus
Product Specifications:
Product Details:
used to determine the Radiation Stefan Boltzmann constant.
|
Product ID: TS-MECH-175
Critical Heat Flux Apparatus
Critical Heat Flux Apparatus
Product Specifications:
Product Details:
a demonstrative tool to present the method of pool boiling.
|
Product ID: TS-MECH-176
Heat Pipe Demonstrator
Heat Pipe Demonstrator
Product Specifications:
Product Details:
computer system cooling, spacecraft and HVAC systems
|
Product ID: TS-MECH-177
Heat Transfer Through Composite wall
Heat Transfer Through Composite wall
Product Specifications:
Product Details:
satisfactory energy dissipation capacity, high shear resistance and deformation capacity compared with traditional RC walls
|
Product ID: TS-MECH-178
Parallel/Counter Flow Heat Exchanger
Parallel/Counter Flow Heat Exchanger
Product Specifications:
Product Details:
used as condenser and evaporator in automotive air conditioner
|
Product ID: TS-MECH-179
Boiling Heat Transfer Unit
Boiling Heat Transfer Unit
Product Specifications:
Product Details:
llows to students investigate the modes of boiling and can make qualitative and quantitatives studies and assessments of convective, nucleate and film boiling.
|
Product ID: TS-MECH-180
Drop & Film Condensation
Drop & Film Condensation
Product Specifications:
Product Details:
useful in powerplant heat exchangers, thermal desalination, self-cleaning surfaces, and heating and air conditioning
|
Product ID: TS-MECH-181
Shell and Tube Heat Exchanger
Shell and Tube Heat Exchanger
Product Specifications:
Product Details:
used to boil water recycled from a surface condenser into steam to drive a turbine to produce power
|
Product ID: TS-MECH-182
Unsteady state Heat Transfer Test Rig
Unsteady state Heat Transfer Test Rig
Product Specifications:
Product Details:
Measures unsteady state heat transfer to bodies of different shape and thermal conductivity
|
Product ID: TS-MECH-183
Plate Type Heat Exchanger
Plate Type Heat Exchanger
Product Specifications:
Product Details:
transferring heat between medium- and low-pressure fluids
|
Product ID: TS-MECH-184
Thermal Conductivity by Guarded Hot Plate
Thermal Conductivity by Guarded Hot Plate
Product Specifications:
Product Details:
transferring heat between medium- and low-pressure fluids
|
Product ID: TS-MECH-185
Window Type Air Conditioner Test Rig
Window Type Air Conditioner Test Rig
Product Specifications:
Product Details:
to understand the construction and working of a window type air conditioner and conduct the trial on it to evaluate performance of the same
|
Product ID: TS-MECH-186
Ice Plant Test Rig
Ice Plant Test Rig
Product Specifications:
Product Details:
used to calculatecapacity of the ice plant, evaluatecoefficient of performance (COP) of the system, to decrease the refrigeration time.
|
Product ID: TS-MECH-187
Air Conditioning Test Rig
Air Conditioning Test Rig
Product Specifications:
Product Details:
to conduct experiments and demonstrate the process of cooling of atmospheric air.
|
Product ID: TS-MECH-188
Cold Storage Test Rig
Cold Storage Test Rig
Product Specifications:
Product Details:
To study the vapor compression refrigeration cycle
|
Product ID: TS-MECH-189
Mechanical Heat Pump Test Rig
Mechanical Heat Pump Test Rig
Product Specifications:
Product Details:
To study the performance of vapour compression Refrigeration system using water cooled condenser / water cooled evaporator
|
Product ID: TS-MECH-190
Air Washer Test Rig
Air Washer Test Rig Air Washer Test Rig
Product Specifications:
Product Details:
to determine the efficiency of an air washer
|
Product ID: TS-MECH-191
Cooling Tower Test Rig
Cooling Tower Test Rig
Product Specifications:
Product Details:
used To determine i) the tower characteristic (KVA/L Value), ii) The made up water flow rate and iii) To plot end states on a psychometric chart which can be used to draw energy balance.
|
Product ID: TS-MECH-192
Refrigeration Test Rig
Refrigeration Test Rig
Product Specifications:
Product Details:
designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation
|
Product ID: TS-MECH-204
Single Cylinder 2 Stroke Petrol Engine
"Three main components from main parts of the test rig.
Welded steel base plate, complete with Mechanical Brake or A.C. Alternator or D.C. Generator or Eddy Current Dynamometer,
Drive coupling and with safety guard, anti vibration mounting.
Resistance loading (Resistance bank) with selector switches to load the engine from no load to full load (Only for A.C. Alternator &
D.C. Generator)
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, ai
Product Specifications:
Product Details:
to provide self-contained facility for teaching spark Ignition engine principles.
|
Product ID: TS-MECH-205
Single Cylinder 4 Stroke Petrol Engine
"Three main components from main parts of the test rig.
Welded steel base plate, complete with Mechanical Brake or A.C. Alternator or D.C. Generator or Eddy Current Dynamometer,
Drive coupling and with safety guard, anti vibration mounting.
Resistance loading (Resistance bank) with selector switches to load the engine from no load to full load (Only for A.C. Alternator &
D.C. Generator)
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, ai
Product Specifications:
Product Details:
to provide self-contained facility for teaching spark Ignition engine principles
|
Product ID: TS-MECH-206
Multicylinder 4 Stroke Petrol Engine
"Two main components from main parts of the test rig.
Welded steel base plate, complete with Dynamometer, Drive shaft with safety guard, engine starting battery of 12V capacity and
cooling water arrangement. Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature and speed indicator."
Product Specifications:
Product Details:
.to provide self-contained facility for teaching
Internal Combustion (spark Ignition) engine principles
|
Product ID: TS-MECH-207
Multicylinder 4 Stroke Petrol Engine
"Two main components from main parts of the test rig.
Welded steel base plate, complete with Dynamometer, Drive shaft with safety guard, engine starting battery of 12V capacity and
cooling water arrangement.
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature and speed indicator."
Product Specifications:
Product Details:
to provide self-contained facility for teaching
Internal Combustion (spark Ignition) engine principles
|
Product ID: TS-MECH-208
1 cylinder/4 stroke Variable Compression
"Three main components from main parts of the test rig.
Welded steel base plate, complete with Dynamometer, coupling and with safety guard, anti vibration mounting.
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement
system, temperature indicator"
Product Specifications:
Product Details:
provide self-contained facility for teaching
Internal spark Ignition engine principles
|
Product ID: TS-MECH-209
Single Cylinder Four Stroke water cooled
"Two main components from main parts of the test rig.
Welded steel base plate, complete with Rope Brake Dynamometer/ A.C. DC Generator/Eddy Current Dynamometer provided with
cooling water arrangement.
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement
system, temperature and speed indicator"
Product Specifications:
Product Details:
provide self-contained facility for teaching
Compression Ignition engine principles
|
Product ID: TS-MECH-210
Four Stroke Slow Speed Diesel Engine
"Two main components from main parts of the test rig.
Welded steel base plate, complete with Rope Brake Dynamometer provided with cooling water arrangement.
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement
system, temperature and speed indicator."
Product Specifications:
Product Details:
to provide self-contained facility for teaching
Compression Ignition engine principles.
|
Product ID: TS-MECH-211
Twin Cylinder Four Stroke Diesel Engine
"Two/Three main components from main parts of the test rig.
Welded steel base plate, complete with A.C. Alternator/Mechanical Brake/ Hydraulic Dynamometer/ Eddy Current Dynamometer,
Drive shaft with safe guard and anti vibration mounting.
Resistance loading (Resistance bank) with selector switches to load the engine from no load to full load (as applicable)
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement
system, tem
Product Specifications:
Product Details:
to provide self-contained facility for
teaching Compression Ignition engine principles
|
Product ID: TS-MECH-212
Multicylinder Four Stroke Diesel Engine
"Two main components from main parts of the test rig.
Welded steel base plate, complete with Dynamometer, drive shaft with safety guard, engine starting battery of 12V capacity and
cooling water arrangement
Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement
system, temperature and speed indicator"
Product Specifications:
Product Details:
to provide self-contained facility for teaching Internal
Combustion (Compression Ignition) engine principles
|
Product ID: TS-MECH-213
Single/Two Stage Reciprocating Air Compressor
"SINGLE/TWO STAGE RECIPROCATING AIR
COMPRESSOR TEST RIG"
Product Specifications:
Product Details:
single-stage compressors are typically meant for use in smaller-scale applications and are usually driven by gas. Two-stage compressors are often powered by electricity and are useful in larger applications requiring compressed air
|
Product ID: TS-MECH-214
Variable Speed Air Blower Test Rig
"VARIABLE SPEED AIR BLOWER TEST RIG
(DYNAMOMETER TYPE):"
Product Specifications:
Product Details:
test rig allows users to measure the discharge, head, and efficiency of centrifugal blowers fitted with forward curved, backward curved, or radial vanes.
|
Product ID: TS-MECH-193
Universal Testing Machine
UNIVERSAL TESTING MACHINE (MECHANICAL)
Product Specifications:
Product Details:
Robust construction
Chrome planted metal components
Wide range of standard and special attachments
accessories available.
|
Product ID: TS-MECH-194
Universal Testing Machine
"UNIVERSAL TESTING MACHINE
HYDRAULIC COMPUTERIZED VERSION"
Product Specifications:
Product Details:
Peak Load along with on line load
Maximum elongation with online elongation
Ultimate Tensile Strength
|
Product ID: TS-MECH-195
Impact Testing Machine(Izod)
Impact Testing Machine(Izod)
Product Specifications:
Product Details:
This Pendulum impact Tester is designed for conducting CHARPY,
IZOD AND IMPACT Test. The test Method confirm to IS: 1973, and IS
1499-1977, and BS: 131 Part 2 & 3-1972 IS: 1598-1977, BS: 131 Part
I- 1972
|
Product ID: TS-MECH-196
Torsion Testing Machine
Torsion Testing Machine
Product Specifications:
Product Details:
Torque Compensated Motors
Maintenance Free Gear Box
Auto Range Selection with Range Selector Wheel
|
Product ID: TS-MECH-197
Universal Spring Testing Machine
Universal Spring Testing Machine
Product Specifications:
Product Details:
used for compression tests on compression and disc springs
|
Product ID: TS-MECH-198
Erichen Cupping Testing Machine
Erichen Cupping Testing Machine
Product Specifications:
Product Details:
to evaluate the ability of metallic sheets and strips to undergo plastic deformation in stretch forming.
|
Product ID: TS-MECH-199
Tensile Testing Machine
"
TENSILE TESTERS are electrically operated machines for t e s t ing
tensile strength and elongation of materials like
plywood, wires, cables, conductors, ferrous and nonferrous
materials"
Product Specifications:
Product Details:
TENSILE TESTERS are electrically operated machines for t e s t ing
tensile strength and elongation of materials like
plywood, wires, cables, conductors, ferrous and nonferrous
materials
|
Product ID: TS-MECH-200
Rockwell Hardness Tester
Rockwell Hardness Tester
Product Specifications:
Product Details:
Manual weight selection an Manual zero adjustment of Dial gauge
|
Product ID: TS-MECH-201
Fatigue Testing Machine
Fatigue Testing Machine
Product Specifications:
Product Details:
1.Light weight, compact size, simple design
2.Table model
3.Simple lever system for changing load
4.Accurately calibrated as per IS075
|
Product ID: TS-MECH-202
BRINELL HARDNESS TESTER
BRINELL HARDNESS TESTER
Product Specifications:
Product Details:
The machine is designed with a Hydraulic Power pack and control
circuit for effortless loading unloading operation. A dial gauge in
from measures depth of ball penetration. This facilitates
production testing within tolrance limits by comparison method
|